Collection: Perm

Bond Recovery + Korean Smoothing Treatment (Professional Use)

Smoke-Free, Formaldehyde-Free, Works below 400°F, Perm and Color Available.

Green Keratin Treatment 4.0 is formulated with chlorophyll and various plant extracts from the Amazon to restore, strengthen, and protect the protein structure of hair. 

How to Use

Step 1: Natural Pure Shampoo

– Shampoo twice.

Step 2: Green Keratin Treatment 4.0

– Apply in 2-3cm sections and leave on for 40-60 minutes and dry hair 90-100%.

(Short Hair: 60g / Medium Hair: 80g / Long Hair: 120g)

Step 3: Natural Pure Treatment

– Rinse off keratin treatment with lukewarm water and apply conditioner generously. Rinse thoroughly and towel dry.

Step 4: Ion Water Treatment

– Spray water treatment as a heat protectant and dry completely with warm air.

Step 5: Illuster Flat Iron

– Section hair and straighten with a flat iron.

Step 6: Inca Mist

– Apply essence mist for a silky, glossy finish and style hair to finish.

Elasticity + Strengthening

Amino Plus Keratin 3.0 increases shine, elasticity and moisture and strengthens bonding power to improve hair structure. Recommended for use before, during, and after chemical processing.

Key Ingredients

Sacha Inchi (Inca Nut) Brazilian Pepper Seed, Euterpe Oleracea Fruit (Acai), Brazil Nut, Wing Stem Passion Flower, and Mauritia Flexuosa Fruit Oil

How to Use

Step 1: Bonding

Bond Repair + Nourishing

Amino Plus Collagen 6.0 increases shine, elasticity and moisture and strengthens bonding power to improve hair structure. Recommended for use before and/or during chemical processing.

Key Ingredients

Sacha Inchi (Inca Nut) Brazilian Pepper Seed, Euterpe Oleracea Fruit (Acai), Brazil Nut, Wing Stem Passion Flower, and Mauritia Flexuosa Fruit Oil

Professional Use

Montera Heat Perm uses natural ion therapy to protect hair and improve texture during perm processing. Formulated with keratin protein complexes and hyaluronic acid, the solution leaves hair defined and healthy. 

Perm Selection

Stylish 11.2S for 7-14 minutes 

Natural 10.2N for 15-20 minutes (+5 if needed)

Damage 8.2D for 8-15 minutes (+4 if needed)

+ Liquid / Cream Neutralizer for 7 minutes

Key Ingredients

Sacha Inchi (Inca Nut), Brazilian Pepper Seed, Euterpe Oleracea Fruit (Acai), Brazil Nut, Wing Stem Passion Flower, and Mauritia Flexuosa Fruit Oil

Professional Use

Collagen PPT is designed to strengthen, protect, and condition the hair during chemical services such as heat perms and color processing.

Formulated with collagen and protein complexes, it helps:

1. Protect hair during chemical processing

2. Prevent dryness and split ends

3. Restore shine, moisture, and elasticity

4. Reduce the risk of over-processing

It can be used alone or mix with EGF Creme depending on the hair condition.

How to Use

1. Before chemical processing, apply Collagen PPT evenly and thoroughly to the hair.

2. Leave on for 2–3 minutes.

*If needed, apply after Keratin PPT

Professional Use

Keratin PPT is designed to strengthen and protect the hair before and during chemical services such as heat perms and color treatments.

Formulated with advanced protein complexes, it helps reinforce weakened hair structure while improving shine, moisture retention, and elasticity.
It supports healthier processing results and enhances curl resilience and color vibrancy.

How to Use

1. Apply Keratin PPT evenly as a pre-treatment before chemical processing.

2. Leave on for 2–3 minutes.

3. Blow-dry to approximately 50% before proceeding.

Repeat once or twice if necessary, depending on hair condition.

*A spray pump is not included with this product. As a courtesy, a complimentary spray pump will be included with your first order. We recommend keeping the pump for continued reuse with future purchases

Professional Use

Buffer PPT is designed to stabilize the hair's pH and neutralize residual alkalinity left after chemical services such as coloring and perming. During alkali based treatments, unwanted alkaline residue may remain in the hair, which can lead to color fading, continued oxidation, dryness, and damage. Buffer PPT helps stop this process at the appropriate time by restoring and balancing the hair's pH level.

How to Use

1. Apply evenly after the first chemical processing step and before neutralizing.

2. Leave on for 2-3 minutes, then proceed with the neutralizing step.

*A spray pump is not included with this product. As a courtesy, a complimentary spray pump will be included with your first order. We recommend keeping the pump for continued reuse with future purchases

Professional Use

Monglee Perm Albo GmA 90 is a specialized reducing booster designed specifically for resistant and strongly curled hair.

It enhances reducing power when the hair does not soften easily, helping achieve more complete and controlled curl formation.

Key Point:
✔ Designed to be mixed with the perm solution for resistant hair
✔ Not for standalone use

For resistant or strongly curled hair, mix GmA 90 at 3–10% with the selected perm solution before application.

How to Use

Prior to processing, mix 3-10% of GMA 90 with Monglee Perm , Montera Perm or Fiber Cream.

*Shake well before use.

*Do not use independently without Repit perm solution.

Key Ingredients

Sacha Inchi (Inca Nut), Brazilian Pepper Seed, Euterpe Oleracea Fruit (Acai), Brazil Nut, Wing Stem Passion Flower, and Mauritia Flexuosa Fruit Oil

Professional Use

Hair Primer is formulated with keratin and protein complexes to help stabilize perm treatments and enhance curl performance.

Designed as a base primer before the main perm solution, it supports controlled and even softening while preventing the hair from drying out or becoming overly rigid.

It also helps protect the hair from heat exposure and alkaline chemical stress during perm services.

How to Use

1. Apply 80g of primer. 

2. Apply low heat for 3-10 minutes.

3. Sit for an additional 5 minutes. 

Professional Use

Balance & Booster is a booster solution designed to enhance softening performance during perm processing. It helps elevate insufficient softening levels, balance moisture within the hair, and improve curl formation for more defined and long-lasting wave results.

How to Use

1. When 90% of the desired level of softening has been reached, apply solution evenly throughout hair.

2. Sit for 5-10 minutes. Then proceed with the next step.

Professional Use

Ember Buffer Treatment enhances color and bleach results and controls the pH level of hair. The emulsion helps to remove alkali chemicals during color and perm processing and provides cuticle smoothing to achieve glass hair.

How to Use

For color processing, apply treatment evenly throughout hair 3 minutes before color removal. After emulsion, rinse with water and shampoo to finish.

For perm processing, adjust ration depending on the level of hair damage and mix with perm solution to apply.

Professional Use

Formulated with keratin and hyaluronic acid, Monglee Perm protects and enhances elasticity during processing for soft wave expression. 

Solution Selection 

Normal 6N for normal hair

+ Neutralizer H2O2

How to Use

1. Shampoo with Natural Spa Shampoo to cleanse hair.

2. Apply EGF Creme to protect and prep hair.

3. Apply Monglee Perm and wind hair around rods.

4. Processing

• If using the Hot Pin Perm Machine, process for 5-10 minutes and remove the pins, then allow the hair to sit for an additional 5-10 minutes.
• If using regular rods, process for 15-20 minutes. 

5. Lightly rinse or spray Buffer PPT evenly and leave on for 2-3 minutes to helps neuralize remaining alkalinity and restore the hair's pH balance.

6. Apply Neutralizer generously and sit for 7 minutes.

7. Remove rods and rinse with Natural Pure Treatment.

8. Apply Kera Plain Foam and dry and style to finish.

*Avoid direct contact with the scalp.

Key Ingredients

Sacha Inchi (Inca Nut), Brazilian Pepper Seed, Euterpe Oleracea Fruit (Acai), Brazil Nut, Wing Stem Passion Flower, and Mauritia Flexuosa Fruit Oil

Professional Use

Q10 Perm is a permanent multi-wave formula that uses natural ion therapy to create natural soft waves. Formulated without ammonia and monoethanolamide (MEA), the perm solution nourishes and strengthens hair for quick wave expression. Recommended for damaged hair types.

Q10 Perm includes:

• Perm Solution
• Neutralizer 

How to Use

1. Apply Q10 Perm Solution generously and wind the hair around rods.

2. Apply heat for 10 minutes, then allow the hair process for an additional 10 minutes at room temperature.

3. Apply Q10 Neutralizer generously to hair.

4. Leave on for 7 minutes.

5. Remove the rods and rinse thoroughly.

Professional Use

High10 Perm is a permanent multi-wave formula that uses natural ion therapy to create volume waves and enhance texture. Formulated without ammonia and monoethanolamide (MEA), the perm solution protects and maintains moisture balance for quick wave expression. Recommended for healthy hair types.

High10 Perm includes:

• Perm Solution
• Neutralizer 

How to Use

1. Apply High10 Perm Solution generously and wind the hair around rods.

2. Apply heat for 10 minutes, then allow the hair process for an additional 10 minutes at room temperature.

3. Apply High10 Neutralizer generously to hair.

4. Leave on for 7 minutes.

5. Remove the rods and rinse thoroughly.

Professional Use

Hair Safer is a perm solution specially formulated for extremely damaged and chemically treated hair.

Designed to minimize additional damage during processing, it helps provide controlled and stable softening while maintaining the integrity of compromised hair.

This formula supports safer perm results on highly sensitized, over-processed, or heavily colored hair.

Key Benefits:

1. Designed for extremely damaged hair

2. Suitable for previously colored or chemically treated hair

3. Minimizes additional damage during perm processing

4. Provides stable and controlled softening

Professional Use

Fiber Cream is a perm solution formulated with vitamin E and keratin protein complexes to minimize damage caused by heat and alkali, enhance volume, and maintain moisture post-processing.

Perm Selection

D 7.5 for Damaged Hair 

O 9.5 for Normal Hair 

S 11.5 for Healthy Hair 

Neutralizer Selection

N.5-E2 (emulsion type for magic / volume magic)

N.5-L1 (liquid type for hot pin perm / iron perm)

How to Use 

1. Apply perm solution thoroughly to hair. 

2a. For D 7.5, leave on for 5-15 minutes.

2b. For O 9.5, leave on for 10-20 minutes.

2c. For S 11.5, leave for 10-20 minutes.

3. Rinse off with lukewarm water.

*Avoid direct contact with scalp.